-
LED Lighting
Downlights
Controls and Power
-
Data Cabling
Bus Cabling
Audio Visual Cabling
-
Custom Options
DIY Home Automation
-
Speakers
Amplifiers
Packages
-
Televisions
Projectors
Projector Screens
-
Routers & Modems
Switches
-
- News
- Contact Us
- Home
- Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP + Managed Ethernet Switch Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP + Managed Ethernet Switch
Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP + Managed Ethernet Switch
Warning: Limited Stock Available.
- Description
- Shipping & Returns
- Reviews
Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP + Managed Ethernet Switch
Physical Port
- 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 802.3bt PoE++ Injector function
- 2 100/1000/2500BASE-X SFP slots for SFP type auto detection
- One RJ45-to-RS232 console interface for basic management and setup
Industrial Hardened-design
- Dual power input, redundant power with reverse polarity protection
- DC 48 to 56V input
- - Active-active redundant power failure protection
- - Backup of catastrophic power failure on one supply
- - Fault tolerance and resilience
- DIN-rail and wall-mountable design
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
Digital Input and Digital Output
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
802.3bt Power over Ethernet
- Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE
- Backward compatible with IEEE 802.3at/af PD device
- Up to 8 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered
- Supports PoE power up to 95 watts for each PoE port
- Total of 360-watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Total PoE power budget control
- - Per port PoE function enable/disable
- - PoE admin-mode control
- - PoE port power feeding priority
- - Per PoE port power limit
- - PD classification detection
- - PoE extend mode control to support power feeding up to a distance of up to 160 meters
- Intelligent PoE features
- Temperature threshold control
- - PoE usage threshold control
- - PD alive check
- - PoE schedule
Layer 3 IP Routing Features
- IP dynamic routing protocol supports OSPFv2
- IPv4/IPv6 hardware static routing
- Routing interface provides per VLAN routing mode
Layer 2 Features
- High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Storm Control support
- Supports VLAN
- Broadcast/Multicast/Unicast
- IEEE 802.1Q tagged VLAN
- - Up to 255 VLANs groups, out of 4095 VLAN IDs
- - Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
- - Private VLAN Edge (PVE)
- - Protocol-based VLAN
- - MAC-based VLAN
- - Voice VLAN
- - GVRP (GARP VLAN Registration Protocol)
- Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- - BPDU Guard
- Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- - Cisco ether-channel (static trunk)
- - Maximum 4 trunk groups with 4 ports per trunk group
- - Up to 40Gbps bandwidth (duplex mode)
- Provides port mirror (many-to-1)
- Port mirroring to monitor the incoming or outgoing traffic on a particular port
- Loop protection to avoid broadcast loops
- Link Layer Discovery Protocol (LLDP)
- Compatible with Cisco uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
- Supports G.8032 ERPS (Ethernet Ring Protection Switching)
- IEEE 1588 and Synchronous Ethernet network timing
Quality of Service
- Ingress Shaper and Egress Rate Limit per port bandwidth control
- 8 priority queues on all switch ports
- Traffic classification
- IEEE 802.1p CoS
- - IP TOS/DSCP/IP precedence
- - IP TCP/UDP port number
- - Typical network application
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Supports QoS and In/Out bandwidth control on each port
- Traffic-policing on the switch port
- DSCP remarking
Multicast
- Supports IPv4 IGMP snooping v1, v2 and v3
- Supports IPv6 MLD snooping v1 and v2
- Querier mode support
- IPv4 IGMP snooping port filtering
- IPv6 MLD snooping port filtering
- MVR (Multicast VLAN Registration)
Security
- Authentication
- IEEE 802.1X Port-based/MAC-based network access authentication
- - Built-in RADIUS client to cooperate with the RADIUS servers
- - TACACS+ login users access authentication
- - RADIUS/TACACS+ users access authentication
- - Guest VLAN assigns clients to a restricted VLAN with limited services
- Access Control List
- IP-based Access Control List (ACL)
- - MAC-based Access Control List
- Source MAC/IP address binding
- DHCP snooping to filter distrusted DHCP messages
- Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
- IP Source Guard prevents IP spoofing attacks
- IP address access management to prevent unauthorized intruder
Management
- IPv4 and IPv6 dual stack management
- Switch Management Interfaces
- Console and Telnet Command Line Interface
- - HTTP web switch management
- - SNMP v1 and v2c switch management
- - SSH, TLS, SSL and SNMP v3 secure access
- SNMP Management
- Four RMON groups (history, statistics, alarms, and events)
- - SNMP trap for interface Link Up and Link Down notification
- IPv6 IP address/NTP/DNS management
- Built-in Trivial File Transfer Protocol (TFTP) client
- BOOTP and DHCP for IP address assignment
- System Maintenance
- Firmware upload/download via HTTP/TFTP
- - Reset button for system reboot or reset to factory default
- - Dual Images
- DHCP Relay
- DHCP Option 82
- DHCP Server
- User Privilege levels control
- Network Time Protocol (NTP)
- Network Diagnostic
- System Maintenance
- SFP-DDM (Digital Diagnostic Monitor)
- - Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
- - ICMPv6/ICMPv4 remote ping
- SMTP/Syslog remote alarm
- System Log
- PLANET Smart Discovery Utility for deployment management
Lead times apply to in-stock items only
Every dispatch and delivery timeframe on this page assumes the item is in stock at our Alexandria warehouse at the time your order is placed.
Home automation is a made-to-order industry. A meaningful part of our range — Control4 controllers and touchscreens, TRIAD architectural speakers, XOTEC product, 2N intercoms, custom-length cable, motorised blinds and made-to-measure shading — is brought in to order or held by the manufacturer rather than by us.
If an item you order is not in stock, we will email you within one business day with the expected availability date. You may then wait, substitute, or cancel that line for a full refund.
Nothing on this page is a guarantee of delivery by a particular date.
Shipping
All orders are processed within one business day. Most in-stock orders placed before 2PM AEST on a business day are shipped the same day.
All orders ship from our warehouse at 17/110 Bourke Road, Alexandria NSW 2015.
| Orders $500 and over | Free shipping |
|---|---|
| Under $500 — Standard (Sendle) | Calculated at checkout |
| Under $500 — Express | Calculated at checkout |
If you have a preferred carrier, note it with your order and we will accommodate it where we can.
You will receive an email confirmation once your order is dispatched, including tracking. If there is any delay in processing your order, we will notify you by email.
We cannot guarantee delivery timeframes. Once dispatched, transit time is in the hands of the carrier. Regional, remote and interstate destinations — including regional WA, NT, far north QLD and TAS — should allow additional business days.
Business days are Monday to Friday, excluding NSW public holidays.
Bulky, oversized & high-value items
Some products cannot be shipped on standard courier rates. These include, without limitation:
- Equipment racks, rack-mounted amplifiers and matrix switchers
- Projectors and projection screens
- Motorised blinds, shading systems and made-to-measure product
- Architectural and outdoor speakers shipped in volume
- Displays, mounts, and any item exceeding standard courier dimensions or weight
For these items we will contact you after your order is placed to arrange insured, signature-required freight and confirm the cost before dispatch. Free shipping does not apply to bulky, oversized or freight-quoted items.
Where freight is quoted separately, the timeframes in Section 01 do not apply. We will confirm the timeframe with the quote.
Pickup from Alexandria
In-stock orders may be collected from our Alexandria warehouse by prior arrangement. Please wait for confirmation that your order is ready before attending.
Project & installation deliveries
Where goods form part of a Home Automation Store design, supply or installation project, delivery is scheduled against your project program by your project contact. This policy governs online retail orders. It does not govern staged project deliveries, site drops or installer-held stock.
Returns policy
Items may be returned within 30 days of purchase, in their original condition, for store credit.
To be eligible for return:
- The item must be unused and in the same condition in which you received it
- It must be in its original packaging with all accessories included
- You must provide a receipt or proof of purchase
A restocking fee may apply.
This policy does not apply to any custom orders, including but not limited to TRIAD speakers, made-to-measure blinds and shading, custom-cut cable, pre-programmed controllers, and any item ordered in specifically to fulfil your order. Custom orders cannot be returned for change of mind.
Opened software, licences and subscription activations are non-returnable once issued.
Items that are not in original condition, are damaged, or are missing parts for reasons not due to our error are not eligible for return.
All returns must be requested by contacting us first.
Faulty items
We will replace or repair items that are defective, or damaged in transit to you.
If your order arrives damaged, do not use the product. Photograph the packaging and the item as received, and contact us within 7 days of delivery.
Before returning a product as faulty, please contact us or work through the relevant troubleshooting steps. A large proportion of returns in this category are network or configuration issues rather than product faults.
Return authorisation
Do not ship a product back to us before obtaining a Return Authorisation.
- Contact us to request an RA number
- Complete and print the RA form, and include it in the package
- Ensure the RA number is clearly labelled on the outside of the package
Product returned without a clearly labelled RA number may be disposed of.
A minimum service charge of $88 applies to items returned where no fault is found. This charge includes return freight.
Return address The Home Automation Store, 17/110 Bourke Road, Alexandria NSW 2015
Return shipping costs
You are responsible for the cost of returning your item. Original shipping costs are non-refundable. Where a credit or refund is issued, the cost of return shipping will be deducted.
For higher-value items we recommend a trackable, insured freight service. We cannot be responsible for items lost in transit back to us.
Order cancellation
Orders that have not yet shipped may be cancelled for a full refund, provided the request is made promptly. Contact us as soon as possible.
Orders for custom or special-order items may not be cancellable once the order has been placed with the manufacturer. We will tell you at the time whether cancellation is still possible.
Warranty
Products sold by The Home Automation Store carry the warranty offered by their manufacturer or Australian distributor — including Control4, TRIAD, SONOS, 2N and XOTEC. Warranty periods and conditions vary by brand and product, and the terms supplied with your product apply.
As the supplying dealer, we lodge and manage your warranty claim with the manufacturer on your behalf. Contact us with your proof of purchase, the product serial number and a description of the fault to begin a claim.
Warranty does not cover physical damage, damage caused by incorrect installation or power events, normal wear and tear, or product modified or serviced by a third party.
Your rights under Australian Consumer Law
Nothing in this policy limits your rights under the Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
These rights apply in addition to, and are not limited by, the change-of-mind, store credit, restocking and warranty terms above.
Related products