PB356 - PSU for Battery Backup System

PB356 - PSU for Battery Backup System

The PB356 Series is a family of 13.8Vdc and 27.6Vdc, 110W / 138W  off-line battery chargers / DC uninterruptable power supplies which operate from 220/240Vac mains power. when connected to a lead-acid battery.  These units provide uninterrupted power to a DC load in the event of mains failure.

The PB356 Series contains a two-step current limited float charger, battery charge current limiting, a battery low voltage disconnect and mains/charger and battery alarms. It employs high efficiency technology, combined with very low output noise that makes it suitable for powering broad range of loads such as communication equipment, control equipment and alarm systems etc.

The PB356 is available in chasis mount enclosure, and can be fitted into the WMBB wall mount box.  A supplementary heatsink is needed for 140W models to operate at maximum power.  All models employ natural convection cooling.

• Ultra-low noise output


• Independent rectifier & battery charging current limiting


• Externally adjustable battery charging current limit


• Advanced monitoring and control


• 2 step float charger or 3 step fast charger switch selectable


• Automatic battery connections and fuse fail testing


• Automatic and manual battery condition testing (BCT)


• Two multi function alarm/ status LEDs


• AC Mains & Rectifier Status. Battery and BCT Status


• Battery low voltage disconnect switch with internal electronic circuit breaker


• Optional battery temperature probe for battery float voltage temperature compensation


• Four form-C alarm relays AC Mains Status. Rectifier Status. Battery Status and Battery Fault


• Optional Ethernet interface with embedded HTML webpage server & SNMP